-
Portable oscilloscope with 2 isolated channels, 600 V CAT III, 40 MHz bandwidth, 2 GS/s ETS, double 8,000-count multimeter with power measurements, 31-order harmonics with 40 to 450 Hz fund., colour screen, USB.
-
Tester/meter for measuring the level of low-frequency electric
fields, equipped with an external antenna. Simple, economical, compact and IP65, with a backlit 2,000-count LCD screen.
-
MiniFlex flexible current sensor for QualistarPlus C.A 8436 and PEL106. IP67 connector and 100 mm clamping diameter.
-
IP67 three-phase power analyser
-
20 MHz generator-meter, multiple functions, ideal for higher education, R&D engineers and scientific research.
-
5 MHz function generator, ideal for education, technical training and R&D, control and production technicians.
-
1P, 3P and 4P earth kits of different lengths.
-
Accessories
and resistivity add-on for 1P, 3P and 4P earth kits, resistivity.
-
The LX1600-PC is a 16-channel logic analysis probe on PC for decoding a large number of data buses: UART, I2C, SPI, CAN, LIN, Modbus, etc.
-
2-channel data logger
-
A compact, ergonomic clamp for measuring alternating currents
-
AC current clamp for Qualistar and PEL
-
Insulated shunts for training purposes
-
Hight AC and DC current clamp
-
For measuring alternating currents
-
Communicating 60,000-count TRMS benchtop multimeter for a broad range of applications in electronics and electrical engineering (1,000 V Cat. III) .
-
Flexible three-phase current sensors
IP67, 1,000 V CAT IV
Measurements from 0.5 A to 3 kA
-
Digital voltage and continuity tester with LCD screen
Automatic AC / DC recognition for voltage
Voltage up to 1,000 V, resistance and capacitance, diode test, automatic power-off
-
Equipped with a 160 x 120 detector and a 38°x28° wide-angle lens, the CA 1954 camera is ideal for all applications in the building, electrical maintenance and mechanical maintenance sectors.
-
RMS leakage current multimeter clamp
-
1 kV Insulation and Continuity Tester
-
Compact multifunction electrical installation tester – All the measurements stipulated by the NF C 15-100 & FD C 16-600 standards
-
Watertight portable conductivity meter,
For checking the quality of water
-
A comprehensive multimeter for electrical maintenance of installations and small AC and DC machines
-
Specially designed for industrial applications, the CA 1727
tachometer measures the rotation speed of any moving part, remotely or
by contact.
-
Clamps for AC leakage current from 500 µA to 400 A
-
Electrical installation tester compliant with the NF C 15-100 & IEC 60364-4 standards
-
Digital tester with MiniFlex® flexible current sensor. AC and DC voltage up to 1,000 V. Current up to 300 A via the MiniFlex® sensor included. Automatic selection of measurement type (resistance, audible continuity, capacitance or diode). No-contact detection of live conductors (phase). Large backlit display. Removable test probes.
-
The MTX 200 Series multimeters which are simple to use for day-to-day work but also offer all the crucial functions of a multimeter: current, voltage and resistance measurements.
-
Compact 400 A AC TRMS clamp multimeter
-
1 kV Insulation and Continuity Tester
-
Class 2 integrating sound level meter – Recording of up to 64,000 measurement points and data processing software supplied as standard – 60-hour battery life – Remote microphone with 5 m extension
-
600 A TRMS AC multimeter clamp
-
Expert multifunction electrical installation tester compliant with the NF C 15-100, FDC 16-600 & EN 61557 standards.
-
For measuring alternating currents
-
This rugged, intuitive digital pH-meter closely matches the requirements in the agri-food industry, education and research.